Future Engineering Developments

With 20 years' experience of manufacturing rotary atomizers and a fresh, innovative approach using modern materials and state of the art manufacturing techniques, We have produced our range of MicroMistTM rotary atomizers.
Benefits

Very uniform mist with the ability to readily adjust droplet size.
Very low water pressure required
Water hardness tolerant
Virtually immune to blockage
Low maintenance
High reliability

We currently have four atomizers in our range:

MicroMist Marvel – Max water flow at 200Hz = 6.0 l/min (20 micron). Requires 0.37 kW single phase input inverter
MicroMist Mighty – Max water flow at 200Hz = 15.0 l/min (20 micron). Requires 1.1 kW single phase input inverter
MicroMist Mighty SS – Max water flow at 200Hz = 6.0 l/min (20 micron). Requires 0.37 kW single phase input inverter
MicroMist Max – Max water flow at 200Hz = 35.0 l/min (20 micron). Requires 2.2 kW single phase input inverter
Max water flow at 200Hz = 70.0 l/min (20 micron). Requires 5.0 kW three phase input inverter

The MicroMist Marvel – 56 – 200 rotary atomizer has been designed for applications requiring smaller volumes of ultra-fine low impact mist. The rotating atomizer head uses centrifugal forces to convert water into mist with a very uniform droplet size. Control of the droplet size is achieved by adjusting the atomizer speed enabling matching of the droplet size to the application. The mark 2 version of the MicroMist Marvel has increased atomizing capacity up to 6.0 l/min or 360 l/h. MicroMist Marvel pictured.
There are only two wear points in the atomizer and these are the drive and non-drive high speed motor bearings. State of the art manufacturing techniques enable a very low weight and ultra-strong construction of the atomizer head which has been optimized to perfectly match the motor performance curves. The atomizer construction is very open and not prone to blockage. The droplet size produced and the performance remains the same even in the event of severe scaling. It can be used with all types of water, including sea water and a wide range of chemicals. Suitable for use in indoor and outdoor applications. Forced ventilation is required to provide cooling for the drive motor. The atomizer requires an inverter drive to provide the correct supply to the motor.

Features

Robust design not prone to blockage
Flow rate 360 l/h with 20 micron droplet
Very low water pressure required - 0.2 Bar at 360 l/h
Suitable for use with all types of water (including sea water) and a wide range of chemicals
Maximum power consumption 0.37 kW at full flow (6.0 l/min with 20 micron droplet)
zero to full flow with uniform performance
Suitable for indoor and outdoor applications

The MicroMist Mighty – 63 – 200 rotary atomizer has been designed for applications requiring smaller volumes of ultra-fine low impact mist. The rotating atomizer head uses centrifugal forces to convert water into mist with a very uniform droplet size. Control of the droplet size is achieved by adjusting the atomizer speed enabling matching of the droplet size to the application. MicroMist Marvel pictured below.

There are only two wear points in the atomizer and these are the drive and non-drive high speed motor bearings. State of the art manufacturing techniques enable a very low weight and ultra-strong construction of the atomizer head which has been optimized to perfectly match the motor performance curves. The atomizer construction is very open and not prone to blockage. The droplet size produced and the performance remains the same even in the event of severe scaling. It can be used with all types of water, including sea water and a wide range of chemicals. Suitable for use in indoor and outdoor applications. Forced ventilation is required to provide cooling for the drive motor. The atomizer requires an inverter drive to provide the correct supply to the motor.

Features

Robust design not prone to blockage
Flow rate 510 l/h with 20 micron droplet
Very low water pressure required - 0.4 Bar at 510 l/h
Suitable for use with all types of water (including sea water) and a wide range of chemicals
Maximum power consumption 1.1 kW at full flow (15.0 l/min with 20 micron droplet)
No anti-vibration mounts required
zero to full flow with uniform performance
Suitable for indoor and outdoor applications

The MicroMist Mighty SS (Stainless Steel) Rotary Atomizer is designed with a stainless steel bodied motor, particularly suitable for areas with high CO2 atmospheres or where the motor is regularly hosed down. The atomizer performance is similar to the MicroMist Marvel amd maintains all the benefits of the MicroMist series of Rotary Atomizers.

Features

Robust design not prone to blockage
Flow rate 360 l/h with 20 micron droplet
Very low water pressure required - 0.2 Bar at 360 l/h
Suitable for use with all types of water (including sea water) and a wide range of chemicals
Maximum power consumption 0.37 kW at full flow (6.0 l/min with 20 micron droplet)
zero to full flow with uniform performance
Suitable for indoor and outdoor applications
Suitable fo high CO2 atmospheirs
Suitable for regular hosing down

The MicroMist Max – 80 – 400 rotary atomizer has been designed for applications requiring high volumes of ultra-fine low impact mist. The rotating atomizer head uses centrifugal forces to convert water into mist with a very uniform droplet size. Control of the droplet size is achieved by adjusting the atomizer speed enabling matching of the droplet size to the application.
There are only two wear points in the atomizer and these are the drive and non-drive high speed motor bearings. State of the art manufacturing techniques enable a very low weight and ultra-strong construction of the atomizer head which has been optimized to perfectly match the motor performance curves. The atomizer construction is very open and not prone to blockage. The droplet size produced and the performance remains the same even in the event of severe scaling. It can be used with all types of water, including sea water and a wide range of chemicals. Suitable for use in indoor and outdoor applications. Forced ventilation is required to provide cooling for the drive motor. The atomizer requires an inverter drive to provide the correct supply to the motor.

Features

Robust design not prone to blockage
Flow rate 4,200 l/h with 20 micron droplet
Very low water pressure required - 0.6 Bar at 4,200 l/h
Suitable for use with all types of water (including sea water) and a wide range of chemicals
Maximum power consumption 4.4 kW at full flow (70.0 l/min)
No anti-vibration mounts required
zero to full flow with uniform performance
Suitable for indoor and outdoor applications

Brighton, England, United Kingdom

Contact the designers and manufacturers of the MicroMist range of Rotary Atomizers for prices, technical questions and application advice. Please remember to check your junk folder if you can't find our reply!!